Product Description
Please make 3D printer filament is to be stored in a sealed bag or box after each print to prevent moisture.
Be sure to insert the free end of the filament into the holes to avoid being tangled for next time use.
If there is no print plan within a few days, retract the filament to protect the printer nozzle.
Printing Temp & Speed
Heated Bed Temp Feature
PLA
200-210℃：
50 -100mm/s.
210-240℃：
100-200mm/s.
50-60℃
PLA filament is the most basic, the most used filament, no clogs, no bubbles, no tangle, Kingroon PLA filament has good
layer adhesion, very easy to use; Good compatibility, suitable for beginners to get started printing！
High-Speed
PLA
190-210℃ ：
50-150mm/s.
210-230℃ ：
150-300mm/s.
230-260℃ ：
300-600mm/s.
50-60℃
Supports fast printing at 600mm/s; Good fluidity, fast printing without clogging, no shortage of materials: volume flow
rate of 30mm ³/s.
PLA Matte
205-215℃：
50 -100mm/s.
215-245℃：
100-230mm/s.
50-60℃ Matte texture, the surface of the model is delicate without layering, without any plastic feel, and has a frosted texture！
SILK
205-215℃
：50 -100mm/s.
215-235℃：
100-200mm/s.
50-60℃ The model has a silky smooth surface and beautiful colors！
PETG
230-240℃：
50 -100mm/s.
240-260℃：
100-200mm/s.
60℃-70℃ Good toughness, resistant to drops and impacts; Good acid and alkali resistance!
High-Speed PETG
205-215℃：
50 -100mm/s.
240-250℃：
100-300mm/s.
260-270℃：
300-600mm/s.
70℃-80℃
PETG that supports fast
Sprinting at 600mm/s; Matte texture, with a delicate printed surface; Not easy to draw;
ABS
250-260℃：
50-100mm/s.
260-280℃：
100-200mm/s.
80-100℃ High strength, good toughness, sturdy and durable!
TPU
190-210℃：
50-80mm/s.
210-230℃：
80-120mm/s.
No need to heat High resilience; The material is soft (95A) and has good ductility！
PLA+
195-205℃：
50 -100mm/s.
205-220℃：
100-300mm/s.
50-60℃ The wire has good toughness and is not brittle or…
